With pen and paper in hand, my photography instructor told us to write down a very important tip to improve our photography skills immediately. With passion and great wisdom, he urged us to READ THE MANUAL.
- How to Prevent Lens Condensation – since I read the manual while on a beach trip, this was extremely helpful. This issue happened to me at least three times and I could not take a single photo, which was frustrating. Condensation occurs when the camera is brought from a cold to a warm environment. Condensation can build up on the lens and internal parts. One tip is to place the camera in a sealed plastic bag and allow it to adjust to the warmer temperature before removing it from the bag.
- Why Use Low Level Formatting – if your card’s recording or reading speed seems slow, using low level formatting to return your card to like “new” condition. When the card is formatted at the normal setting, only the file management info is changed, but low level formatting will delete all contents.
- Difference Between Program and Auto Mode – Program Mode keeps a balance between the shutter speed and aperture which frees you to think about other settings such as ISO speed or using the flash to obtain the desired exposure (matching the subject and ambient lighting). If you choose to use this mode, pay attention to what you see in the viewfinder. If the light is blinking on the shutter speed/aperture display, then your camera is telling you to check the exposure. Your manual should have an ISO guide, to give you a range to target based on whether the lighting is sunny, cloudy, indoors, or dark. Auto Mode is full automation, where you relinquish all control and allow the camera to decide the end result of your picture. I rarely use this setting since I like to be in control (as usual). Once I made the commitment to be a better photographer, I realized I had to be willing to make mistakes, practice and learn the right settings based on the lighting conditions and type of image I want to capture.
- Using Depth of Field Preview Button – did not even notice this button on the front of my camera for a long time. This button can be used to check the depth of field (amount in focus) through the viewfinder based on the current settings. As you make adjustments to the aperture, press this button to see depth of field in real time.
- Setting Copyright Information – you do not need to be a professional to add copyright information to your photos. The set up instructions will vary from camera to camera, but I learned how simple it was to enter in my information directly into the camera so that it will be automatically saved with each shot I take.